AEL Switching Power Supply 12VDC / 24VDC

image

Single Phase 220VAC / 12VDC

MODELInput/Output Price (THB)
AEL-DCS-25W12VInput 220VAC / DC Output 12V 25W750.00
AEL-DCS-50W12VInput 220VAC / DC Output 12V 50W1,000.00
AEL-DCS-100W12VInput 220VAC / DC Output 12V 100W1,280.00
AEL-DCS-150W12VInput 220VAC / DC Output 12V 150W1,480.00
AEL-DCS-300W12VInput 220VAC / DC Output 12V 300W2,350.00
AEL-DCS-500W12VInput 220VAC / DC Output 12V 500W3,250.00

(Price is excluding VAT 7%)

 


Single Phase 220VAC / 24VDC

MODELInput/Output Price (THB)
AEL-DCS-25W24VInput 220VAC / DC Output 24V 25W850.00
AEL-DCS-50W24VInput 220VAC / DC Output 24V 50W1,150.00
AEL-DCS-100W24VInput 220VAC / DC Output 24V 100W1,450.00
AEL-DCS-150W12VInput 220VAC / DC Output 24V 150W1,850.00
AEL-DCS-300W24VInput 220VAC / DC Output 24V 300W2,890.00
AEL-DCS-500W24VInput 220VAC / DC Output 24V 500W3,880.00

(Price is excluding VAT 7%)

Technical Specification

Input Voltage  
     AC88-132VAC/176-264VAC  - 50/60HZ
Rated Power 12VDC       25W/2.1A   50W/4.2A    100W/8.3A    150W12.5A     300W/25A   500W/37.5A
Rated Power 24VDC       25W/1A    50W/2.1A    100W/4.2A    150W6.25A    300W/12.5A   500W/20.8A
Output Voltage       DC12/24V
Protectio Overload       Above 105% rated output power
Protection type       Hiccup mode, recovers automatically after fault condition is removed
Over voltage (Range)      5.75-6.75V    13.8-16.2V    17.25-20.25V    27.6-32.4V
Protection reset type       Shut down o/p voltage, re-power on to recover
Function "DC OK" Active signal (max)      3.75 ~6V/ 50mA    9 - 13.5V/40mA    11.5-16.5V/40mA    18-27V/20mA
Environment working temp.      -20 ~ +70C (Refer to "Derating Curve")
Working humidity       20 - 90% RH non-condensing
Storage temp, humidity       -40 ~ +85C ,10- 95% RH
Temp. Coefficient       0.03%/C (0 - 50C)
Vibration Component       10 - 500Hz, 2G10min./1 cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
Mounting type       DIN Rail

 SAFETY & EMC
 (Note 4) SAFETY STANDARDS UL508, TUV EN60950-1 approved
WITHSTAND VOLTAGE l/P-0/P:3KVAC l/P-FG:2KVAC 0/P-FG:0.5KVAC
ISOLATION RESISTANCE  l/P-O/P, l/P-FG, 0/P-FG:100M Ohms/500VDC/25C/70% RH
EMC EMISSION: Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2.-3
EMC IMMUNITY :Compliance to EN610004-2,3,4,5,6,8,11, EN55024.EN61000-6-1 ,EN61204-3, light industry level, criteria A

MTBF 584Khrsmin. MIL-HDBK-217F (25C)
DIMENSION 22.5*90*100mm (W*H*D)
PACKING 0.17Kg; 72pcs/13.2Kg/0.91CUFT


NOTE

1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3.Tolerance : includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้